Ontario’s Home Renovation Savings program offers qualifying cold climate air source heat pump rebates based on the home’s existing primary heating source. The published purchase rates are CAD $500 per ton, up to $2,000, for eligible Enbridge gas-heated homes, and $1,250 per ton, up to $7,500, for eligible electrically heated, oil, propane or wood-heated homes. These are conditional program rates, not a guaranteed payment for every ductless mini split.
Sources reviewed October 15, 2026For this route, the participating contractor submits a pre-installation application. Approval must come before installation; the program says installations completed before approval are ineligible. A heat pump purchased through an ordinary quotation process does not become approved simply because the installer says the model is efficient. See the official heat pump program.
Make that sequence visible in your agreement. Ask who submits the application, how you receive confirmation, and when the installation date becomes firm. If the contractor needs a deposit while approval is outstanding, ask what happens if the application is declined or the approved equipment differs from the original proposal. Resolve those commercial terms before payment rather than after a truck arrives.
An urgent replacement needs particular care. Tell the contractor if the existing heating system has failed and ask what temporary or separate service arrangements are possible while the funding decision is pending. Do not treat an urgent situation as an automatic exception to the program’s published timing requirement. Get any project-specific direction from the administrator in writing.

A house with a gas furnace and a heat pump addition does not automatically qualify for the higher non-gas rate. The program distinguishes the existing primary heating source and utility connection. Eligibility includes ownership, specified housing types and an existing home rather than a newly occupied build. For the non-gas route, the Ontario electricity-grid condition matters; the official page identifies a specific Cornwall Electric exception.
Ask the contractor to document the heating source used in the application. A fireplace used occasionally, portable heater or one room’s electric baseboard should not be casually substituted for the home’s primary system. If the property has mixed heating, describe the arrangement accurately and obtain an eligibility determination rather than choosing whichever description produces the largest headline rebate.
The quoted tonnage also needs a source. The program describes the incentive calculation using minimum rated heating capacity at 8.3°C, or 47°F. Do not assume that the model’s marketing size or the sum of indoor-head labels is the approved incentive capacity. Ask to see the matched-system record and the calculation used for the application.
| Home or transaction category | Published cold climate air source rate |
|---|---|
| Eligible Enbridge natural gas purchase | $500 per ton, maximum $2,000 |
| Eligible electricity, oil, propane or wood purchase | $1,250 per ton, maximum $7,500 |
| Eligible rental arrangement | Separate route: $500 per ton, maximum $2,000 |
The program requires an active model on the applicable Natural Resources Canada qualified-products list and a participating HVAC contractor. Ask for the complete indoor and outdoor combination, not just a product series. A single-zone system and a multi-zone outdoor unit with several heads can have different records even when their brand and appearance are similar.
Put the proposed model numbers in the quote before comparing offers. If a supply issue leads to a substitute, ask the contractor to resolve the application consequences before installation. Save the revised approval or correspondence with the equipment schedule. A verbal assurance that the replacement is “equivalent” is not a useful document if a later reviewer finds a different model on the invoice.
For a multi-storey home, also request a coverage explanation. Which rooms will receive direct airflow? Which rooms retain another heating source? Does the proposal cover the same spaces as the other quotation? These are practical design questions. A larger rebate cap does not mean the household should buy a larger system or additional heads that the room loads do not justify.
The rental incentive is not the same as the purchase incentive. If a proposal advertises a monthly payment, ask whether it is a rental, a loan or a financed purchase. Record who owns the equipment, who receives the incentive, the total contractual obligation, maintenance responsibilities and any buyout or cancellation terms. A low monthly headline does not answer those questions.
Compare the full commitment over the period you expect to keep the system. Include any mandatory service charges and the consequences of selling the home. This comparison is about the contract being offered, not a prediction that one ownership model is always cheaper. Ask the provider to explain the figures in writing so you can compare a cash purchase on the same basis.
For a purchase, request an itemized gross price before assistance. Electrical upgrades, line routing, mounting, condensate work, taxes and removal should be clear. Use the Ontario mini split cost guide for the scope questions, then keep the approved rebate as a distinct line rather than allowing it to hide differences between installations.
Keep the eligibility correspondence, pre-installation approval, signed quote, model schedule, final invoice and payment records together. Ask for photographs of accessible unit labels or record the models from the handover documents. The application and invoice should tell the same story about the property, equipment and work completed.
After installation, the contractor submits the post-installation application. Ask when that was sent and whether anything remains outstanding. If the administrator requests a correction, keep the response and confirmation in the same folder. Do not assume that an installation warranty registration also completes the rebate application; they serve different purposes and may be handled by different people.
If you are coordinating other renovations, list each incentive separately and ask the relevant administrators about combining support. An insulation grant, heat pump incentive and financing offer should not be collapsed into an unexplained total. Disclose other funding where required and avoid counting the same eligible expense twice in your own budget.
Is an energy assessment required for this heat pump route? The official heat pump page says an assessment is not required for this route. That does not remove the need for an appropriate installation assessment, sizing and program pre-approval. A contractor still needs enough information about the home to propose suitable equipment.
Can a landlord apply? The program directs the owner to apply where the property has tenants, subject to the remaining requirements. Clarify access, communication and the proposed installation with the occupants, and have the administrator confirm the property’s eligibility. Ownership alone does not establish that every building type or project qualifies.
Will the maximum pay for my entire installation? The maximum is a cap, not a project-specific promise. Ask for the actual calculated amount and the approval evidence, then plan how you will pay the balance and any excluded work. MiniSplitCanada is an independent directory; compare companies for installation enquiries and use the program’s official channels for funding decisions.
Home Renovation Savings’ official heat pump page, including its eligibility, rates and application sequence, was reviewed October 15, 2026. Current terms and your approval govern the claim.
Review company information and confirm the service you need.
Compare companies →Ask an installer to assess your rooms and project scope.
Explore the directory →
Join the conversation
Have a question about this guide? Leave a comment below.