$4,000–$7,000 CAD for one zone, $7,500–$11,000 for two and $10,000–$16,000+ for three or four are ZK Mechanical's published installed ductless ranges. Its stated context includes Burlington, Oakville and Hamilton. For cleaning, SDG Duct Cleaning in Eastern Ontario lists $140 for an indoor-head-only service; an exact additional-head discount is not established. Tax must be confirmed. These examples are not an Ontario average. Prices checked October 14, 2026.
Ontario mini split prices are easier to interpret when each number keeps its location, equipment description and installation scope. A Toronto-area single-room heat pump, an Ottawa multi-room system and a Hamilton-area addition are not three observations of the same project.
Sources reviewed October 14, 2026The table below uses three independent contractor sources. It is a set of published examples, not three bids for an identical property. No regional price ranking can be calculated from it because the equipment and installation allowances are not matched.
| Provider and market context | One zone, CAD | Multiple zones, CAD | What to clarify |
|---|---|---|---|
| ZK Mechanical, Hamilton/Burlington/Oakville context | $4,000–$7,000 | Two: $7,500–$11,000; three or four: $10,000–$16,000+ | Exact model, heating specification, tax and site allowances |
| Energy Clean, Woodbridge/GTA context | $4,500–$8,500 | No comparable head-count band used here | Single-zone heat pump scope and site work |
| Dtech Services, Ottawa | $3,500–$5,500 | Two to four: $7,000–$14,000 | Exact head count, model pairing and tax |
Sources: ZK Mechanical, Energy Clean and Dtech Services. Taxes are not specified beside these ranges. The GTA example is regional evidence, not a measured City of Toronto price.
Do not average the lowest and highest entries and call the result a typical Ontario installation. Instead, ask local contractors to quote the same rooms, heating objective and access conditions. The public examples help frame that request; the written proposals establish what your project would actually buy.

For an addition, define whether you want cooling, supplemental heat or a replacement for the existing heating in that space. Ask how the new room connects to the rest of the home and which doors are normally closed. A focused one-room scope can be compared separately from any proposed work on the main heating system.
For a house with several occupied floors, request a room schedule before settling on head count. Ask which areas retain their existing heat and which rely on the new equipment. A proposal covering an open ground floor should not be compared with one including separate upstairs bedrooms as if the price difference were only a contractor markup.
For a condominium, settle the ownership and building approval questions early. Ask the building manager what documentation is required for the proposed location and route. The contractor’s willingness to install equipment does not itself establish permission to alter a shared exterior or building system. Budget for the agreed approval and construction scope, without assuming every Ontario building follows the same process.
SDG Duct Cleaning lists an indoor-head-only clean at $140 in its Cornwall and Eastern Ontario service context. It does not turn that price into a province-wide first-head-plus-extra-head package. Ask for the full visit price for your actual address and number of units.
Ashton Heating’s published maintenance offer lists $149.99 plus HST for most major appliances, including ductless and heat pump equipment. That is a Durham-area maintenance example, not proof of the same deep-cleaning scope as SDG’s indoor-head service. Keep the task descriptions and geography beside the numbers.
Ask whether the quote includes the blower wheel, indoor coil, filters, drainage checks and outdoor-unit work. Identify access over stairs or fixed furniture and describe symptoms before booking. A lower service total can reflect less work, while an operating problem may require diagnosis in addition to cleaning.
The official Home Renovation Savings heat pump page says pre-approval is mandatory and installations completed before approval are ineligible. A participating contractor submits the pre-installation application. Confirm the current process before ordering or starting work.
The program’s help and support page explains property, heating-source and equipment conditions. It also distinguishes a first heat pump installation from replacing an existing system or adding an indoor unit. Do not assume an additional head qualifies because the equipment brand appears in eligible-product marketing.
For quote comparison, show the gross installed total first. Keep a proposed incentive on a separate line with its conditions and approval status. A contractor’s advertised maximum is not the amount every homeowner receives, and a financing offer should not be described as a rebate.
The property categories in the official program also matter. A condominium ownership structure and an eligible building type are not the same question. Before assuming a condo unit qualifies, check the actual dwelling category with the program administrator. Building permission to install and financial eligibility should be treated as separate decisions, with documentation for each.
Ask each bidder to mark items that are fixed and items that remain provisional. These often need a more precise description of the route, access, electrical work or finish restoration. A written change-approval process is more useful than a vague promise that everything is standard.
For electrical work, request the assessment and the scope included in the installation price. If a separate trade is needed, get that quote before choosing the HVAC offer. Do not assume the same service upgrade is needed in every house with the same panel label or age.
For the installation route, identify who reinstates walls and exterior finishes. Ask whether covers, interior boxing, painting and disposal are included. If the outdoor position changes during design, have the revised route and price documented rather than relying on the original verbal discussion.
When a system fails, obtain a diagnosis and an itemized repair scope. Ask about parts availability, applicable warranty and the total with labour and tax. A diagnostic visit, a cleaning service and a component replacement are separate purchases even when they occur on the same day.
A replacement quote should identify disposal, new model pairing, commissioning and assessment of existing infrastructure. Ask which lines, supports and electrical components can remain for the proposed equipment. Reuse must be evaluated, not assumed from the fact that a mini split was previously installed there.
If you want additional rooms served, request a separate expansion option. That lets you compare restoring current coverage with buying a larger system. For heating-led projects, also ask for the design explanation and the role of retained heat. Keep the result tied to your home’s requirements rather than a generic provincial capacity rule.
Our Canada cost guide provides national context, and the rebate hub is a starting point for further program research. MiniSplitCanada is an independent directory, not an equipment seller or installer. The published examples here are references for evaluating proposals, not quotations issued by us.
Review company information and confirm current service coverage.
Browse the directory →Ask an installer to assess your rooms, equipment and installation scope.
Explore company information →
Join the conversation
Have a question about a quote or service scope? Leave a comment below.