Quebec mini split price examples include CAD $3,000–$5,000 installed for a 12,000–18,000-BTU wall system in Groupe Mon Confort's guide and $3,000–$7,000 in AirGreen's Montreal FAQ. Mon Confort lists multi-zone starting prices around $5,000–$6,000. For cleaning, Montreal provider Climeo lists $200 for the first residential unit and $150 per additional head before tax. These are named-provider examples, not a province-wide average. Checked October 15, 2026.
For a Quebec ductless project, keep the equipment and installation price, taxes and any LogisVert assistance on separate lines. A low advertised net price is difficult to assess until the exact model pairing and eligibility are known.
Sources reviewed October 15, 2026
Begin with the complete pre-tax installation proposal. Ask which indoor and outdoor units, lines, supports, electrical work and commissioning are included. Identify provisional work separately. A broad starting price becomes useful only when the contractor confirms what it covers at your property.
Revenu Québec specifies 5% GST and 9.975% QST, each calculated on the sale price. When a published price does not state its tax treatment, do not silently treat it as tax-inclusive. Ask for an itemized invoice and retain the provider’s original price basis.
Treat any incentive as a separate conditional amount. The cash needed to pay an installation invoice and the eventual cost after approved assistance are different budgeting questions. Avoid reducing every price in a comparison table by the largest advertised rebate, particularly when the examples do not identify an eligible matched system.
Groupe Mon Confort’s price guide supplies a wall-system range and a multi-zone starting point. AirGreen’s FAQ gives a Montreal wall-system range. Air Péloquin’s installation guide lists wall systems from $2,300 and multi-zone systems from $5,000.
These are three independent published sources, but they do not describe three identical projects. Air Péloquin’s article is a 2025 guide, still available when checked. Its entry prices should be reconfirmed, not promoted as a guaranteed 2026 offer. None of these examples establishes what every Quebec City or Gatineau homeowner will pay.
| Source | Wall-system example | Multi-zone example | Main limitation |
|---|---|---|---|
| Groupe Mon Confort | $3,000–$5,000 | Starts around $5,000–$6,000 | Configuration and site details vary |
| AirGreen, Montreal | $3,000–$7,000 | Obtain a matched quote | Montreal evidence, not every city |
| Air Péloquin, 2025 guide | From $2,300 | From $5,000 | Older starting prices to reconfirm |
Prices are CAD with tax unstated in these installation examples. No combined average is calculated. A starting price and a full range answer different questions, while equipment capacity alone does not establish the same winter performance or installation scope.
A useful provincial comparison would hold the model pairing, number of heads, heating objective, line allowance and electrical scope constant. Public pages rarely provide that complete set of information. The evidence here therefore cannot establish which of the three cities is cheapest.
In Montreal, an apartment project needs a defined dwelling boundary and an agreed outdoor location. In a Quebec City winter-heating project, ask the designer to explain mounting, snow exposure and defrost-water planning. In Gatineau, ensure the quotation and incentive assumptions apply to a Quebec property rather than an Ottawa address.
These are project questions, not universal building descriptions. Give each estimator the same room schedule and ask for explicit exclusions. If one proposal includes finishing work, disposal or an electrical allowance that another omits, reconcile that difference before judging the equipment price.
Use Hydro-Québec’s eligible-equipment search with the equipment identifiers and installation date. A brand name or the capacity printed in an advertisement is not enough to establish the grant for a particular indoor and outdoor combination.
The official residential program conditions set out requirements for the home, equipment, retailer and installer. Check those details before committing. Keep model numbers, invoices and installation records together so the evidence used at quotation time can be matched to the equipment actually installed.
The official deadline is within nine months of installation. That timing does not mean every purchase qualifies. Ask the provider to identify the relevant listing and expected amount in writing, then verify it independently. The provincial cost guide should support that check without replacing the full program rules.
When comparing French-language proposals, preserve the exact product identifiers while translating the descriptions for your own comparison. Terms such as murale, multizone and centrale describe different arrangements; do not place them in one price column without identifying the system type. Ask the supplier to clarify whether a quoted amount is for equipment alone, standard installation or the full assessed project. Keep the original document with any translated notes so later changes can be checked against what was actually offered.
Climeo’s Montreal pricing information lists $200 for one residential unit and $150 for each additional mini split head before tax. ProNetClim’s Quebec City page starts at $359 tax-inclusive per accessible indoor head below nine feet. Those conditions differ, so the two prices do not measure a simple city premium.
Ask whether the service includes the coil, blower, drain pan, filters and drainage checks, and whether the outdoor unit is included. Specify the number and type of heads and any access difficulty. A discounted extra-head rate cannot be assumed when a provider only publishes a per-unit price.
Separate routine inspection from deep cleaning and fault diagnosis. A recurring maintenance agreement may include different tasks from a one-time wash. If the unit leaks or displays an error, describe that before booking and ask whether a diagnostic visit is the appropriate first step.
For repair, request the diagnosed fault, parts, labour, testing and any travel charge. Ask which costs are covered by the actual warranty. Neither a brand’s reputation nor a general warranty headline establishes reimbursement for a particular service visit.
For replacement, include removal, disposal and confirmation of any retained lines, wiring or supports. Identify whether the new design preserves the old room coverage or expands it. A proposal serving additional rooms should not be compared with a repair solely by subtracting their totals.
Ask the contractor who is responsible for each trade and check the applicable licence for the work. Keep municipal and building-management requirements specific to the property. MiniSplitCanada is an independent directory, not a contractor or grant administrator; the Canadian cost guide provides broader context while your written local proposal establishes the project price.
If financing is offered, request the cash price and credit terms as separate documents. Compare the term, interest, total payments and any fees with the purchase total, rather than comparing a monthly payment against a cash quotation. Ask when a deposit becomes due and what happens if the approved location or selected equipment changes. Keep the final model schedule attached to the signed scope, and require a revised price before accepting substitutions. These records also make later warranty or service discussions easier because the installed package is identifiable.
Review company information and confirm current service coverage.
Browse the directory →Ask an installer to assess your rooms, equipment and installation scope.
Explore company information →
Join the conversation
Have a question about a quote or service scope? Leave a comment below.