CAD $3,500–$6,500 for a single zone, $7,500–$11,000 for two zones, and $10,000–$14,000 for three zones are examples of published mini split installation prices in Canada. They come from different contractors and markets, identified below. For cleaning, one Kelowna provider lists $300 for a head and $90 for each additional head in the same condo. These are sourced examples, not a Canadian average or a quote for your home.
Sources reviewed October 12, 2026Same rooms, head count, model pairs and heating coverage.
Electrical, access, removal, travel and tax can change the total.
Use only assistance confirmed for your household and project.
Prices checked October 12, 2026. All amounts are CAD. The opening examples use one provider for each configuration. The installation comparison below contains four independent provider sources. Model numbers, line lengths and tax treatment are not consistently disclosed, so the prices cannot be treated as matching, all-in offers. No rebate has been deducted by MiniSplitCanada.
The clearest way to compare a ductless heat pump price is to start with the number of indoor heads and the rooms they will serve. A one-head installation for an addition is a different purchase from a system intended to heat bedrooms, a main floor and a basement. The following public prices show that distinction without combining unlike projects into a national average.
| Source and market | Published CAD price | Scope and missing details |
|---|---|---|
| Greenfoot Energy Atlantic Canada and BC service markets | 1 head: $3,500–$6,500 Multiple heads: $8,000–$16,000 | Equipment, installation, electrical work and commissioning listed as included. The page describes multi-zone configurations differently in different sections; confirm the head count. Tax and matched models not specified. |
| ZK Mechanical Burlington, Oakville and Hamilton context | 1 head: $4,000–$7,000 2 heads: $7,500–$11,000 3–4 heads: $10,000–$16,000+ | Installed price guidance. Cold-climate models are discussed as an additional cost. Exact equipment, tax and site allowances require a quote. |
| Central Air HVAC Greater Victoria | 1 head: $3,300–$7,000 2 heads: $7,000–$11,000 3 heads: $10,000–$14,000 | Equipment and standard installation included. The public table does not define the electrical allowance, line length, matched model or tax treatment. |
| BC Wide Greater Vancouver | 1 head: $4,500–$7,500 2 heads: $8,000–$11,000 3–5 heads: $12,000–$16,000+ | Installed ductless guidance. Confirm heating specifications, electrical upgrades, applicable permits and taxes for the proposed system. |
A second indoor head adds more than another wall unit: its route, drain, controls and installation time need to appear in the proposal. Ask whether the outdoor unit changes when the extra room is added. Conversely, two separate single-zone systems may create a different electrical and mounting scope from one outdoor unit feeding two heads.
Request alternative layouts against the same room-by-room requirements. A lower price is useful only if the design still serves the rooms you need. For example, a main-floor head and retained bedroom baseboards should be described as partial coverage, rather than priced beside a whole-home proposal without explanation.
Ask each contractor for a written scope that separates the equipment from the work around it. A product name alone does not identify a system: record the outdoor model and every indoor model, their quantities, the proposed heating coverage and the warranty terms supplied with the offer. Natural Resources Canada recommends asking about model and AHRI identification, sizing, placement and warranty.
| Quote item | What to have written down |
|---|---|
| Equipment | Matched indoor and outdoor models, number of heads, controls and equipment price. |
| Refrigerant lines and drains | Included route and length, exterior covers, wall penetrations, drain routing and any pump. |
| Electrical work | Circuit, disconnect and permit responsibilities; any panel or service work priced separately. |
| Mounting and access | Stand or bracket, access equipment, wall repair and finishing responsibility. |
| Completion | Commissioning, removal of old equipment, owner instructions and warranty registration. |
| Final amount | Subtotal, each applicable tax, approved extras, payment schedule and quote expiry. |
Use the checklist to request missing information, not to assume that every published price already includes it. If a contractor gives a fixed total rather than separate labour and equipment figures, the work can still be clearly itemised. What matters is identifying the included work and the conditions under which the total can change.
Keep installation cost and operating cost separate. A cheaper system is not automatically cheaper to run, and a high efficiency rating does not establish your annual bill. NRCan advises sizing for the building’s heating and cooling loads, climate and intended use. Ask for that assessment before paying for extra capacity. Our heat pump savings calculator can help explore running-cost assumptions once you have a realistic design.

Cleaning prices need a description of the work. Washing removable filters, cleaning the indoor coil and blower, and inspecting a complete system are different services. Ask whether the outdoor unit, drainage test, protective wash bag and any blower removal are included. A low service price may cover useful maintenance without covering a deep indoor clean.
| Provider and service | CAD price | What the price covers |
|---|---|---|
| Summit Property Care, Kelowna | Head: $300 Extra condo head: $90 | Head, blower, coil and filters. The additional-head price is specifically for the same condo unit. Tax treatment is not stated. |
| SDG Duct Cleaning, Cornwall and SDG | Standard: from $170 Deep: from $250 | Indoor-head work; the deeper service involves more disassembly. Basic outdoor visual inspection included; repairs and extensive outdoor cleaning extra. Tax and extra-head rate not stated. |
| Trium Mechanical, Fraser Valley | $175 yearly plan Extra head: $25 Deep clean add-on: $200 per head | One inspection/filter-cleaning visit for the outdoor unit and up to two heads. Deep cleaning is a separate add-on at that visit. Repair parts and labour excluded; tax not stated. |
The $25 additional maintenance head and $90 additional condo cleaning head are not interchangeable rates. They belong to different services and providers. Before booking, send the company the head count, unit type, access details and symptoms. Ask for the first-head price, each extra-head charge, travel charge and final tax-inclusive total in the same reply.
A diagnostic appointment is the first price to establish when a unit fails. TrustM8 in Halifax lists an onsite heat pump diagnostic visit starting at $250 before applicable taxes; additional work needs approval. That is one company’s starting charge, not a Canada-wide diagnostic rate or a completed repair price.
Ask whether the diagnosis charge is credited if you approve the repair, whether a return visit is included, and whether quoted parts are available. Record the actual fault before comparing repair with replacement. A cleaning appointment will not necessarily include electrical troubleshooting, and an equipment parts warranty may leave labour, travel or other charges payable. Obtain the written warranty decision for your system.
For replacement, ask for removal and disposal to be named in the scope. Do not assume the existing line set, mount, circuit or indoor heads can be reused with a new outdoor unit. Have the installer identify what is compatible and what must change. The installation examples above are useful starting references, but the sources do not provide a consistent replacement allowance that can simply be added to every job.
This guide samples providers serving parts of BC, Ontario and Atlantic Canada. It does not contain enough matching offers to rank all provinces, calculate a provincial premium or publish a national average. Even within one city, an easily reached ground-level system and a condo installation can involve different work.
Start with the same proposed head count, heating coverage and equipment specification when obtaining local quotes. Keep tax, panel upgrades, access and removal on separate lines. That makes it possible to understand a price difference instead of attributing the whole difference to the province.
For existing local detail, see our Newfoundland mini split cost guide and St. John’s installation and service prices. The Canadian installer directory helps you identify companies to contact. MiniSplitCanada is an independent directory; the listed examples are not offers from this website.
Keep the full installation price visible before showing any incentive. Confirm the program, eligible matched equipment, existing heating source, contractor requirements and application sequence with the program administrator. A maximum advertised rebate does not establish what your household will receive.
In BC, for example, BC Hydro lists $4,000 for eligible whole-home projects and $1,500 for eligible partial-home projects replacing qualifying electric heating. These amounts have different requirements. They should not be subtracted from every one-head or multi-head price in this article.
Also separate borrowing from a rebate. NRCan currently lists the Canada Greener Homes Loan as closed; previously approved loans are a separate situation. Do not use an old loan advertisement as evidence of funding for a new application. Start with our rebate directory, then check the live administrator’s terms before committing.
Only if the offer says installation is included and defines the work. Compare the complete project, including electrical work, access, finishing and taxes. A unit-only retail price is not comparable with the installation figures in this guide.
No single rate is established by these sources. Head count helps describe the project, but the outdoor unit, line routing and rooms served also need to match. Ask for a complete two-head or three-head design rather than multiplying a single-head price.
First resolve the differences in scope. Compare the exact equipment, included electrical work, heating coverage, exclusions and written warranty. A lower total may be a good offer, or it may leave part of the job to another contractor.
Follow the equipment manual and the service needs identified for your home. Ask the installer for a written maintenance schedule and distinguish routine inspection from deep cleaning. Keep records so you know what was actually done at each visit.
Find local installers and compare options for your home.
Browse local companies →Talk to a local installer about the best options for your home.
Find installers in Canada →
Join the conversation
Have a question about a quote or service scope? Leave a comment below.